Oven Maintenance Tips To Practice Regularly2 min read
An oven is a tool to warm food and even help bake cake. These devices contain a hollow chamber and provide heat to the chamber in a controlled way. However, these tools require special care and maintenance to run smoothly. You can take a few simple steps to maintain your electric oven in Dubai. To begin, avoid using liquid cleaners. Check for any burnt heating elements, blown fuses, and leaks. Performing these steps yourself will prevent the need for a professional to repair the unit.
Avoid liquid cleaners:
When cleaning your oven, it’s important to avoid caustic-based products. These can damage your oven in the long term. When using a caustic-based cleaner, you should open the windows to ventilate the room and wear protective clothing, such as gloves and eyewear.
Check for burnt-out heating elements:
Checking for burned out heating elements is one of the most important steps when maintaining an electric oven. A burned-out heating element can affect the efficiency of your oven. To check if you have a damaged or burned element, use a multimeter and set it to the ohms setting. If the reading is higher than normal, replace the element.
Check for a blown fuse:
If your oven is not working, you may have a problem with the electrical wiring in your home. You should check the electrical wiring to find out if there are any loose connections and if there is a possibility that the fuse is blown. If you suspect the fuse is blown, you must call a professional electrician to assess the situation. In some cases, the blown a fuse could be caused by moisture in the wiring, so you must ensure that the area is dry and free of moisture.
Check for a blown sleeve-bearing:
One of the most basic tasks when maintaining an electric oven is to check for a blown sleeve-bearing. This type of bearing can significantly reduce the life of an induction motor. It should be cleaned and checked for pressure and position. It should also be properly lubricated. The oil level should be the same at rest and during operation. Check for loose connections, as well. The technician should also visually inspect the drive system to ensure it runs smoothly without vibration. The commutator should also be checked for smoothness and slot damage.